Usage:
The edge of the rough cloth can be decorated with cloth strips presser foot, helps you easily make the edging width less than 7mm. Straight stitches, zigzag stitches or decorative stitches can be used
Using method:
1. Before installing the presser foot, please guide groove binding into the presser foot, to ensure that the groove rolling pressure foot selvage alignment.
2. Pull out binding strips from the rear of the presser foot.
3. Install the presser foot.
4. Adjust the needle position, until the needle point is located in the border edge.
Tip: if the needle can not be adjusted to the appropriate position on the edge, you can loosen the pressure foot screws, adjusting guide groove position and move around.
Applicable model: XL2600/BM2600/XL5500/XL5600/BC2500/ES2400/NV30/NV400/NV1200/NV4000
Specifications:
Material: metal
Size: approx. 5.5 X 2 X 1.5cm/2.16 X 0.78 X 0.59inch
Weight: approx. 17g

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures. Thank you!
2. Please forgive 1-3cm measuring deviation due to manual measurement.


Included:
1 X Presser Foot