107ele 3D hot bed printer power module / focus MOSFET expansion module Inc 2pin lead
Features:
1.The power of the hot bed is too big and the current problem of the load
2.Under the premise of a normal cooling, it works stable under I (Max) = 20A,
The current must not exceed 20 A while the process works
3. If you need something greater than or equal to 15A, this module is essential. For example.
Description:
1.As the ChiTu controller board is only capable of 15 a, this configuration will not work.
2.To make it work,You need this extra power module.
3.If your total power consumption is 240 W and you have a 12 V power supply, it means that you need at least 20 A (20X12 = 240 W).
Specifications:
Dimensions: 60x50mm
Color:black
Material:metal
Package Included:
1*mos
1*cable
Notes:
1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2. Please allow slight dimension difference due to different manual measurement.