Chìa Khóa Điều Khiển Từ Xa 4 Kênh 433mhz Cho Xe Hơi

Giới thiệu Chìa Khóa Điều Khiển Từ Xa 4 Kênh 433mhz Cho Xe Hơi

Specifications:
1. Use for garage door, sliding door, door, ect.
2. Easy to use, the 4-channel remote control system lets you take control of your gadgets, your car, your home and your garage.
3. Faster data copy speed, not easy to lose code, remote distance.

Characteristics
Multi-functional and multi-variable, personalized and user-friendly, simple and quick to use design.
This smart copy remote control is suitable for electric door remote control, telescopic door remote control, garage door remote control.
Cloning chip types:
2260 (PT2260, SC2260, LX2260, HX2260); 2262, (PT2262, SC2262, LX2262, HS2262, HX2262), PT2264, PT2240 (LX2240), 1527 (EV1527, HS1527, HX1527), FP527, CS5211, SMC918, SMC926, AX5026, AX5326-3, AX5326-4, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F629, PIC16F630 and so on. Different chip manufacturers have different chip model prefixes, as long as the digital part of the chip can be the same model.
Note: We generally do not recommend copying a rolling code chip, as there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control, it is not possible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling code remote control.

Cleaning method code:
1. Press the unlock button and the lock button at the same time (some shells are the up button and down button)

2. After the LED indicator light flashes three times, loosen one of the buttons while the other is held down by pressing, then press the released button three times, the LED indicator will enter into the fast flashing state.

3. At this time, all memory data is erased, the cleaned remote control will not have an LED light indicator, no matter which button you press.

Copy method:
One hand keeps the original remote control, while another keeps the copy remote control, the two remote controls must be placed as close as possible (the good situation is to put the two remote controls on the desk side by side with zero distance ), press the copy button respectively, When the LED indicator flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote controls have lower transmission power, so the original remote control must be placed back to the copy remote control to operate. For the presence of noise, it should avoid interference to operate, if the copy is not successful, it should recopy after erasing the code.

The package includes:
1x 433 MHZ remote control (built-in battery)

Hình ảnh sản phẩm

Giá OBS